The main difference between the FMW and Forteza series detectors, is that these detectors have 4 independent channels, to protect one detection zone from other detection zones nearby that may be working on the same frequency channel and thereby prevent them from showing noise visualisation via the on screen display produced from different areas located near to the detection zone.

Sometimes this type of detector may need modifications in non-standard perimeter protection applications. Perhaps there maybe cars in the road close by or other moving objects. In this non-standard situation the detector can then be connected to a computer via an RS-485 port and on the monitor it will be easy to see that there is influence from a moving object outsie of the protected zone. If this influence is very strong, then the relevant evasive decision can be taken. For example: to change the detection parameters of the detectoror or to change the detector location.

Independent channels are a highly important function for non-standard projects as this feature allows the use of more than 9 detectors in one single area of protection. The Forteza company engineers often see this type of problem in storage areas for metallic items and junk yards for example, where the signal from one detection zone is reflected from piles of scrap metal and might influence a nearby detection zone.

Detection area measures up to 50, 100 or 200 m. Operating frequency is 10,525 GHz and the device has a narrow detection zone of up to 2.3 metres for 200 metres length.

The detector parameters can be changed or monitored remotely via a sensor using the RS-485 port connected to a computer.

Forteza PC detectors can be used to protect photovoltaic parks, factories, warehouses, airports, car parks, building lots and other territories. Detector sensitivity can be adjustable for more detail, automatically or manually depending upon the landscape and required detection parameters for the protected area.