With a depth of 455 mm, the new Slim-Cubes can be used in areas that were, due to space requirements, not suitable for rear projection cubes before. The easy-handling concept with projection units in innovative single-module design with integrated and motorised geometry adjustment enables a quick and easy setup. Like all Eyevis cubes the new slim model is equipped with a robust self-supporting casing and the proved seamless screen bracket with discrete screen clamp technology to install big video walls with smallest bezels between adjacent displays. Additionally, the front and rear access enables an easy installation and start-up as well as a quick exchange. Eyevis presented the new Slim-Cubes for the first time at Infocomm in Las Vegas at the end of June

The Slim-Cubes achieve a minimal space requirement by their reduced depth of 455 mm (with 50"screen diagonal and Full HD resolution). This is made possible by the special construction of the optical light path in the newly developed projection unit in single-module-design. As part of the easy-handling-concept all electric, optical and electronic components as well as the cooling system are integrated completely into the unit. This also includes the 6 axis adjustment sledge for the projector’s alignment.

Via the front or rear access the projection unit as a whole can be inserted into or removed from the cube casing in a few simple steps. All connections can also be performed both from the front or the back. This allows a quick and easy operation and adjustment. Thanks to the front access the cubes can be placed very close to a wall allowing a further space saving.

Additionally, the easy-handling-concept speeds the setup and reduces the downtime during maintenance. Due to the single-module-design of the projection unit and the front access of the cubes it is possible to for example build a video wall without having a projection unit in the cube encasing during setup. This saves weight during the construction and reduces the risk of damage of the projection units. If the entire cube wall is installed, the projector units can be easily inserted into the casing and connected via the front access or from the backside and be adjusted with a software.

Their maintenance works in a similar manner. Damaged or serviceable projector units are simply removed from the cubes and replaced by an exchange-unit. The cube is immediately ready for use and the removed projector unit is serviced in the workshop. This reduces downtime to an absolute minimum.

Part of the easy-handling-concept also is the robust and self-supporting case of the slim cubes which enables an installation without an additional supporting structure. Thus the cubes can be easily placed on top of each other while building a video wall. This again saves space and speeds the setup, plus curved constructions are also possible.